How to use startwith?

If you are experiencing problems with "Everything", post here for assistance.
Post Reply
TheBestPessimist
Posts: 28
Joined: Sat Jan 14, 2023 6:36 pm

How to use startwith?

Post by TheBestPessimist »

I would like to search for the little poopies that macos creates, the files which start with "._".

I expected `startwith:"._"` to work, but it does not. I attached a screenshot of what i want to search for.
Attachments
2024-02-03-0000006774.png
2024-02-03-0000006774.png (57.24 KiB) Viewed 2758 times
TheBestPessimist
Posts: 28
Joined: Sat Jan 14, 2023 6:36 pm

Re: How to use startwith?

Post by TheBestPessimist »

I am sure such files exist and are indexed by Everything, because i can search for them by full name:
Attachments
2024-02-03-0000006775.png
2024-02-03-0000006775.png (27.2 KiB) Viewed 2756 times
NotNull
Posts: 5458
Joined: Wed May 24, 2017 9:22 pm

Re: How to use startwith?

Post by NotNull »

Most likely cause: Match Path is enabled (Menu => Search )
That will make Everything search the entire path (C:\.... ). Startwith:C:\ would list your ._ files (among thousands of others).

2 solutions:
- (temporarily) disable Match Path
- change your search to: nopath:startwith:._


EDIT:
Just remembered that there is a third option. It was discussed here.
Basically: change the following setting to match_start_of_filename_with_caret=2 and search for
^._

(untested)
froggie
Posts: 300
Joined: Wed Jun 12, 2013 10:43 pm

Re: How to use startwith?

Post by froggie »

try nopath:startwith:._ or uncheck match path in search.

@void: is this the way it is supposed to work?
NotNull
Posts: 5458
Joined: Wed May 24, 2017 9:22 pm

Re: How to use startwith?

Post by NotNull »

@froggie: see my Edit for a link to a discussion on this topic.
TheBestPessimist
Posts: 28
Joined: Sat Jan 14, 2023 6:36 pm

Re: How to use startwith?

Post by TheBestPessimist »

@NotNull thanks, confirmed it works. _Now let's see what that option breaks in the future._
NotNull
Posts: 5458
Joined: Wed May 24, 2017 9:22 pm

Re: How to use startwith?

Post by NotNull »

The only thing I found so far with the caret to mark the start of the file is if I used startwith:^ to find files starting with a ^, one would use one of the following instead:
- startwith:^^
- startwith:"^"
- ^^

That last one is obviously the better one for a lazy person like me ;)
froggie
Posts: 300
Joined: Wed Jun 12, 2013 10:43 pm

Re: How to use startwith?

Post by froggie »

@NotNull:

I don't understand what the discussion you pointed to has to do with startwith: -- ^ does not seem to work the same as startwith: and startwith: is unaffected by the match_start_of_filename_with_caret setting.

The question is why "startwith:._ " gives no hits at all when match path is checked (not too many, as you indicated in your reply)
NotNull
Posts: 5458
Joined: Wed May 24, 2017 9:22 pm

Re: How to use startwith?

Post by NotNull »

froggie wrote: Sat Feb 03, 2024 6:56 pm The question is why "startwith:._ " gives no hits at all when match path is checked (not too many, as you indicated in your reply)
From that thread:
void wrote: Thu May 06, 2021 5:53 am ^ should match the start of the full path (when match Path is enabled)
Full path = filename including path, i.e. C:\folder\file.txt.
So startwith:notepad will find nothing as there is no full path that starts with notepad



froggie wrote: Sat Feb 03, 2024 6:56 pm ^ does not seem to work the same as startwith:
Do you see different results when using
^abc
vs.
startwith:abc
? They should be the same.
(when Match Path is unchecked and match_start_of_filename_with_caret is set to either 1 or 2 )
froggie
Posts: 300
Joined: Wed Jun 12, 2013 10:43 pm

Re: How to use startwith?

Post by froggie »

Thanks. That makes it clearer.

So if ^ and startwith: are conceptually the same, shouldn't match_start_of_filename_with_caret affect both (or there should be an equivalent parameter for startwith:), since the same logic applies?
void
Developer
Posts: 16681
Joined: Fri Oct 16, 2009 11:31 pm

Re: How to use startwith?

Post by void »

The recommend way for Everything 1.5+ is:

startwith:name:._

startwith:
name:



For Everything 1.4:

nopath:startwith:._



Search -> Match Path will force Everything to match the full path and name.



Please consider the following search:

\._


So if ^ and startwith: are conceptually the same, shouldn't match_start_of_filename_with_caret affect both (or there should be an equivalent parameter for startwith:), since the same logic applies?
^ and startwith: are the same internally.
Using match_start_of_filename_with_caret=2 applies nopath: ( ^ is the same as nopath:startwith: )
froggie
Posts: 300
Joined: Wed Jun 12, 2013 10:43 pm

Re: How to use startwith?

Post by froggie »

\._ Great. Simple and uncomplicated.
TheBestPessimist
Posts: 28
Joined: Sat Jan 14, 2023 6:36 pm

Re: How to use startwith?

Post by TheBestPessimist »

> The recommend way for Everything 1.5+ is:
>
> startwith:name:._

Thanks, that works just as well too!
Post Reply